S3 | Co | Ci | β |
0.75 | 0.5 ÷ 0.3 | 0.25 ÷ 0.2 | 35o ÷ 5o |
1.00 | 0.6 ÷ 0.3 | 0.30 ÷ 0.2 | 35o ÷ 5o |
1.50 | 0.7 ÷ 0.3 | 0.50 ÷ 0.3 | 35o ÷ 5o |
S3 | Co | Ci | β |
2.00 | 1.2 ÷ 0.4 | 0.50 ÷ 0.3 | 35o ÷ 5o |
2.50 | 1.8 ÷ 0.6 | 0.60 ÷ 0.3 | 45o ÷ 5o |
Unit:mm
Good
Very Good
Good
Fair
Good
Layer | Average analyses of the material | Thickness of layer |
---|---|---|
Sliding layer (Minimum) |
PTFE Coating | 10µm |
Intermediate layer (Average Peak) |
CuSn11 Sintered | 200 ÷ 350µm |
Supporting shell | Mild steel (Also Tin/zinc coated) |
0,70 ÷ 2,20 mm (Depending on Dim. of the Bearing) |
Good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions
Very good performance in lubricated applications
Good performance in greased applications
Suitable for linear, oscillating and rotating movements
Lead-free material
Bearing forms available in standard dimensions
Cylindrical bushes
Flanged bushes
Flanged Washers
Sliding plates
Thrust washers
Bearing forms made to order:
Standard forms in special dimensions, half-bearings, special shapes obtained by stamping or deep drawing, bearings with locating notches, lubricant holes and machined/stamped grooves, customized bearing designs
Automotive Aerospace, agricultural equipment, construction equipment, food and beverage, material handling equipment, forming machines: metal, plastic and rubber; office equipment, medical and scientific equipment, packaging equipment, pneumatic and hydraulic cylinders,