DX Bimetal Bush
ID and OD Chamfers
| S3 | Co | Ci | β |
| 0.0315 | 0.008-0.030 | 0.002-0.018 | 30o ÷ 5o |
| 0.0472 | 0.012-0.035 | 0.006-0.022 | 30o ÷ 5o |
| 0.0630 | 0.015-0.040 | 0.008-0.032 | 30o ÷ 5o |
| S3 | Co | Ci | β |
| 0.0787 | 0.030-0.060 | 0.008-0.032 | 30o ÷ 5o |
| 0.0945 | 0.050-0.095 | 0.020-0.043 | 45o ÷ 5o |
Unit:mm
Operating Performance
Dry
Poor
Oil lubricated
Good
Grease lubricated
Very Good
Water lubricated
Poor
Process fluid lubricated
Poor
Structure of the material:
| Layer | Average analyses of the material | Thickness of layer |
|---|---|---|
| Sliding layer (Minimum) |
POM-C | 250-450 µm |
| Intermediate layer (Average Peak) |
CuSn11 Sintered | 200-350 µm |
| Supporting shell | Low Carbon Steel | 0,50 ÷ 2,70 mm (Depending on Dim. of the Bearing) |
| Protective layer | Sn or Zn | 2-8 µm |
Marginally lubricated bearing material for grease or oil lubricated applications
Standard parts contain grease indents in the sliding layer; plain sliding layer available by request
Optimum performance under relatively high loads and low speeds
Suitable for linear, oscillating and rotating movements
Wide range of parts available from stock
Bearing forms available in standard dimensions
Cylindrical bushes
Thrust washers
Sliding plates
Bearing forms made to order:
Standard forms in special dimensions, half-bearings, special shapes obtained by stamping, bearings with locating notches, lubricant holes and machined grooves, customized bearing designs
Automotive Mechanical handling and lifting equipment, machine slides, hydraulic cylinders, hydraulic motors, ski-lifts, pneumatic equipment, medical equipment, textile machinery, agricultural equipment, scientific equipment, etc.