TU-P
The TU-P Engineered Plastic Bush is manufactured from specially formulated engineering-grade polymers that offer an excellent balance of strength, weight reduction, and design versatility. We are most trusted Engineered Plastic Bush Manufacturers in Bangalore, using these advanced materials to ensure superior quality and consistent performance. Unlike conventional metallic bearing materials, engineered plastics provide inherent resistance to moisture, chemicals, and environmental influences, helping maintain stable operating characteristics over time. TU-P is a lightweight yet robust bearing component designed for smooth operation and excellent dimensional accuracy.
Developed through advanced material engineering, the TU-P Engineered Plastic Bush is designed to support modern equipment requirements where precision and efficiency are critical. The optimized polymer structure helps absorb vibration, reduce operating noise, and improve overall system performance. Manufactured under stringent quality controls, each bush undergoes detailed inspection to ensure uniform material composition and accurate dimensions.
Characteristics
Self-lubricating
Corrosion resistance
Best material to use with soft shaft materials
Low moisture absorption
Vibration dampening
Low coefficients of friction
Maintenance free
Low weight
High wear resistance
Very good price performance ratio
Applications
| Property | Test Method | Units | Value DAM |
|---|---|---|---|
| Mechanical | |||
| Stress at Break | ISO 527 | MPa (kpsi) | 185 (26.8) |
| Strain at Break | ISO 527 | % | 2.8 |
| Tensile Modulus | ISO 527 | MPa (kpsi) | 10300 (1500) |
| Flexural Modulus | ISO 178 | MPa (kpsi) | 9200 (1330) |
| Flexural Strength | ISO 178 | MPa (kpsi) | 270 (39.2) |
| Notched Charpy Impact Strength | ISO 179/1eA | kJ/m2 | 13 |
| Unnotched Charpy Impact Strength | ISO 179/1eU | kJ/m2 | 80 |
| Thermal | |||
| Deflection Temperature | ISO 75-1/-2 | °C (°F) | |
| 1.80MPa | 250 (482) | ||
| Melting Temperature | ISO 11357-1/-3 | °C (°F) | |
| 10°C/min | 263 (505) | ||
| Other | |||
| Density | ISO 1183 | kg/m3(g/cm3) | 1500 (1.50) |
Properties
Technical Data
Dimensions Table
Good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions
Very good performance in lubricated applications
Good performance in greased applications
Suitable for linear, oscillating and rotating movements
Lead-free material compliant to EVL, WEEE, and RoHS specifications
Availability
Bearing forms available in standard dimensions
Cylindrical bushes
Flanged bushes
Sliding plates
Bearing forms made to order :
Standard forms in special dimensions, thrust washers, flanged thrust washers, half-bearings, special shapes obtained by stamping or deep drawing, bearings with locating notches, lubricant holes and machined/stamped grooves